Storing Your Iron - Rowenta DA1560U1 Manual

1103910128 DA1510 F2_110x220mm 18/02/13 13:27 Page7
Storing your
iron.
Problems
and possible causes
• The temperature selected is too low.
• The steam control is set on OFF.
• There is no water in the tank
Water is dripping from the holes in the soleplate
• You have been using the burst of
steam button too often.
• Steam is used before the iron is hot
enough.
• The iron is stored with water in th
tank.
• The problem persists.
HELPLINE:
if you have any product problems or queries, please contact our Customer Relations
Team first for expert help and advice:
or consult our website - www.rowenta.co.uk
Your iron produces little or no steam
Set the temperature control on •••
Switch the steam control to ON.
.
Fill the water tank.
Wait a few seconds between each
shot.
Set the thermostat within the coloured
steam zone and wait until the iron is
hot (approx. 2 min.).
Empty the tank before storing the iron
and set the steam control to OFF.
Take your iron to an Approved
Service Centre.
0845 602 1454 - UK
(01) 677 4003 - Ireland
7
NO
10 min
Solutions
EN