Page 3
SAFETY INSTRUCTIONS • Please read these instructions carefully and keep them for further references. • Never leave the appliance unattended when it is connected to a power source; if it has not cooled down for approximately 1 hour. • The iron must be used and rested on a flat, stable, heat-resistant surface.
IMPORTANT RECOMMANDATIONS • The voltage of your electrical installation must correspond to that of the iron (220- 240V). Always plug your iron into an earth socket. Connecting to the wrong voltage may cause irreversible damage to the iron and will invalidate the guarantee. •...
Your iron has been designed to operate using untreated tap water. Setting the temperature. 2 min Note ! Your iron will only produce steam when the control is set within the coloured zone. USING BURST OF STEAM AND VERTICAL STEAM To remove creases vertically.
DRY IRONING Temperature Burst of steam Steam control Silk, set to Temperature set to • Synthetics ironing at setting •• Wool ••• ••• Our advice : With the iron in DRY mode, start by ironing fabrics at a low temperature (•) before moving on to those requiring a higher temperature (•••).
• The problem persists. Service Centre. HELPLINE: if you have any product problems or queries, please contact our Customer Relations Team first for expert help and advice: 0845 602 1454 - UK (01) 677 4003 - Ireland or consult our website - www.rowenta.co.uk...