Frequency/Voltage Control - Gigabyte GA-8IR2003 User Manual

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
CPU Clock Ratio
CPU Host Clock Control
x CPU Host Frequency (Mhz)
x Fixed PCI/AGP Frequency
Host/DRAM Clock ratio
Memory Frequency (Mhz)
PCI/AGP Frequency (Mhz)
: Move Enter:Select +/-/PU/PD:Value F10:Save
F5:Previous Values F6:Fail-Safe Defaults
CPU Clock Ratio
This option will not be shown or not be available if you are using a CPU with the locked ratio.
10X~ 24X
CPU Host Clock Control
Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot . When
time out occur, system will reset and run at CPU default Host clock at next boot.
Disable
Enable
CPU Host Frequency
100MHz ~ 355MHz
Frequency/Voltage Control
[15X]
[Disabled]
100
33/66
[Auto]
266
33/66
F7:Optimized Defaults
Figure 8: Frequency/Voltage Control
It's depends on CPU Clock Ratio.
Disable CPU Host Clock Control.(Default value)
Enable CPU Host Clock Control.
Set CPU Host Clock from 100MHz to 355MHz.
- 45 -
Item Help
Menu Level
ESC:Exit F1:General Help
BIOS Setup