Gigabyte GA-8ILMT4 User Manual page 36

! ! ! ! ! UR2 Duplex Mode
IR Function Duplex Half. (Default Value)
!Half
IR Function Duplex Full.
!Full
! ! ! ! ! Onboard Serial Port 2
BIOS will automatically setup the port 2 address.
!Auto
Enable onboard Serial port 2 and address is 3F8.
!3F8/IRQ4
Enable onboard Serial port 2 and address is 2F8. (Default value)
!2F8/IRQ3
Enable onboard Serial port 2 and address is 3E8.
!3E8/IRQ4
Enable onboard Serial port 2 and address is 2E8.
!2E8/IRQ3
Disable onboard Serial port 2.
!Disabled
! ! ! ! ! UART Mode Select
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
Set onboard I/O chip UART to ASKIR Mode.
!ASKIR
Set onboard I/O chip UART to IrDA Mode.
!IrDA
Set onboard I/O chip UART to Normal Mode. (Default Value)
!Normal
! ! ! ! ! UR2 Duplex Mode
IR Function Duplex Half. (Default Value)
!Half
IR Function Duplex Full.
!Full
! ! ! ! ! Onboard Parallel port
Enable onboard LPT port and address is 378/IRQ7. (Default Value)
!378/IRQ7
Enable onboard LPT port and address is 278/IRQ5.
!278/IRQ5
Disable onboard LPT port.
!Disabled
Enable onboard LPT port and address is 3BC/IRQ7.
!3BC/IRQ7
! ! ! ! ! Parallel Port Mode
Using Parallel port as Standard Parallel Port. (Default Value)
!SPP
Using Parallel port as Enhanced Parallel Port.
!EPP
Using Parallel port as Extended Capabilities Port.
!ECP
Using Parallel port as ECP & EPP mode.
!ECP+EPP
- 33 - BIOS Setup