E) IDE1/ IDE2 (IDE1/IDE2 Connector)
1
F) SYS_FAN (System FAN Connector)
Sense
+12V/Control
1
GND
G) CLR_CMOS (Clear CMOS)
2-3 close: Normal
1
1-2 close: Clear CMOS
1
$ Important Notice:
1
$ You may clear the CMOS data to its default
- 17 -
Please connect first harddisk to IDE1
and connect CDROM to IDE2.
values by this jumper.
Default doesn't include the "Shunter" to prevent
from improper use this jumper. To clear CMOS,
temporarily short 1-2 pin.
Hardware Installation Process