Gigabyte GA-8IE533 User Manual page 34

F On-Chip Primary PCI IDE
When enabled, allows you to use the onboard primary P CI IDE. If a hard disk controller card is
used, set at Disabled.
Enable onboard 1st channel IDE port. (Default v alue)
8Enabled
Disabl e onboard 1st channel IDE port.
8Disabled
F On-Chip S econdary PCI IDE
When enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller card is
used, set at Disabled.
Enable onboard 2nd channel IDE port. (Default v alue)
8Enabled
Disabl e onboard 2nd channel IDE port.
8Disabled
F IDE1 Conductor Cable
Will be automati c ally detected by BIOS (Default Value)
8Auto
Set IDE1 Conductor Cable to ATA66/100 (Please make sure y our IDE dev ice and
8ATA66/100
cable is compat i ble w ith ATA66/100)
Set IDE1 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and cable
8ATA33
is compatibl e w ith ATA33)
F IDE2 Conductor Cable
Will be automati c ally detected by BIOS (Default Value)
8Auto
Set IDE2 Conductor Cable to ATA66/100 (Please make sure y our IDE dev ice and
8ATA66/100
cable is compat i ble w ith ATA66/100)
Set IDE2 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and cable
8ATA33
is compati b le w i t h ATA33).
FUSB Control ler
Disable this option if you are not using the onboard U SB feature.
Enabl e d USB Controller. (Default value)
8Enabled
Disabl e d USB Controller.
8Disabled
GA-8IE533 Motherboard - 30 -