Adjusting The Airflow Rate - Daikin FTXM50UVMZ Operation Manual

Adjusting the Airfl ow Rate
Tips for saving energy
Keeping the temperature setting at a moderate level helps save energy.
• Recommended temperature setting for cooling: 26.0 - 28.0°C, heating: 20.0 - 24.0°C
Cover windows with a blind or a curtain.
• Blocking sunlight and air from outdoors increases the cooling (heating) effect.
Keep the air fi lters clean.
• Clogged air fi lters cause ineffi cient operation and waste energy. Clean them once in about every 2 weeks.
If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn off the circuit breaker.
• The air conditioner always consumes a small amount of electricity even while it is not operating.
You can adjust the airfl ow rate to increase your comfort.
„ To adjust the airfl ow rate setting
Press .
• Each pressing of
AUTO
• When the airfl ow is set to "
become quieter.
• In the quiet operation mode, the airfl ow rate is set to a weak level.
• In DRY operation, the airfl ow rate setting cannot be changed.
• If COOL/DRY operation is started with airfl ow settings on "AUTO", the indoor unit will
initially deodorise, which functions to suppress any internal odours. As a result, the indoor
unit will not emit air immediately. (Wait for about 1 minute.)
• At smaller airfl ow rates, the cooling (heating) effect is also smaller.
changes the airfl ow rate setting in sequence.
Indoor unit quiet
", quiet operation starts and noise from the indoor unit will
Basic Operation
Airflow rate 1-5 (Low to High)
Page 28
12