Table of Contents
Advertisement
7ZM Motherboard
BIOS Flash Protection
Enable
BIOS Flash Write Protection.
Disable
Normal. (Default Value)
DRAM Drive Strength
Auto
Set DRAM Drive Strength to Auto.
Manual
Set DRAM Drive Strength to Manual.
If DRAM Drive Strength is Manual, then you can adjust item below.
MD Bus Strength
High
Set MD Bus Strength to High.
Low
Set MD Bus Strength to Low.
CAS Bus Strength
High
Set CAS Bus Strength to High.
Low
Set CAS Bus Strength to Low.
Delay DRAM Read Latch
1.0ns
Set DRAM Read Latch Delay to 1.0ns.
1.5ns
Set DRAM Read Latch Delay to 1.5ns.
0.5ns
Set DRAM Read Latch Delay to 0.5ns.
No delay
Set DRAM Read Latch No delay.
Memory Data Drive
6 mA
Set Memory Data Drive to 6 mA
8 mA
Set Memory Data Drive to 8 mA
SDRAM Command Drive
16 mA
Set SDRAM Command Drive to 16 mA
24 mA
Set SDRAM Command Drive to 24 mA
Memory Address Drive
16 mA
Set Memory Address Drive to 16 mA
24 mA
Set Memory Address Drive to 24 mA
41
Advertisement
Chapters
Table of Contents
