Table of Contents
Advertisement
7VTX Motherboard
A.5 Notices :
1.
In order for STR to function properly, several hardware and software requirements must
be satisfied:
A.
Your ATX power supply must comply with the ATX 2.01 specification (provide more
than 720 mA 5V Stand-By current).
B.
Your DDR must be PC-200 compliant.
2.
Jumper is provided to connect to the STR LED in your system chassis. [Some chassis
may not provide this feature.] The STR LED will be illuminated when your system is in
STR sleep mode.
Please note:
Do not remove memory modules while RAM LED is on. It might cause
short or other unexpected damages due to the 2.5V stand by voltage.
Remove memory modules only when STR function is disabled by jumper
and AC Power cord is disconnected.
RAM LED Connector External.
1
+
LED1
45
Advertisement
Table of Contents
