Pnp/Pci Configurations - Gigabyte GA-7DX User Manual

PnP/PCI Configurations

CMOS Setup Utility-Copyright( C ) 1984-2000 Award Software
Reset Configuration Data
Resources Controlled By
X IRQ Resources
INT A Assignment
INT B Assignment
INT C Assignment
INT D Assignment
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Reset Configuration Data
Disabled Disable this function. (Default value)
Enabled Enable Reset Configuration Data function.
Resources Controlled by
Manual User can set the PnP resource (I/O Address, IRQ & DMA channels)
used by legacy ISA DEVICE.
Auto(ESCD) BIOS automatically use these PnP rescuers. (Default value)
IRQ (3, 4, 5, 7, 9, 10, 11, 12, 14, 15)
PCI Device The resource is used by PCI device. (Default value)
Reserved Set the resource to reserved.
PnP/PCI Configurations
Disabled
Auto (ESCD)
Press Enter
Auto
Auto
Auto
Auto
Figure 7: PnP/PCI Configurations
68
BIOS Setup
Item Help
Menu Level 4
Default is Disabled.
Select Enabled to
reset Extended System
Configuration Data
ESCD) when you exit
Setup if you have
installed a new add-on
and the System
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
F1:General Help