Table of Contents
Advertisement
All manuals and user guides at all-guides.com
CPX2(M1-20WL)
The WIRELESS NETWORK can not be
communicated to PC when the WIRELESS
NETWORK is in a factory default settings.
Did you check above P.12 and P.15 ?
YES
When you check
connection, LED on
WIRELESS SD card lighting
continuously not blinking?
YES
Is there
projector nearby
(within 100m) which use
same default setting?
NO
Turn on the
projector again, and click
FIND button on MIU Live Viewer.
Is IP address "192.168.1.10"
displayed?
NO
Click One-Click
button on MIU Live Viewer.
Is IP address "192.168.1.10"
displayed?
NO
Is MIU setup the
factory default setting?
(Refer Fig.1)
YES
Is setting of IP on
PC "192.168.1.N" ?
(subnetmask:"255.255.255.0")
(N:integer , 1 to 9 or 11 to 254)
(Refer Fig.3-1 to 3-4)
YES
A
NO
Check above P.12 and P.15
Once unplug the power cord,
and wait until LED changes
blinking to lighting after you
NO
plugged the power cord.
Check connection again.
(Need to unplug the power cord.
Stand-by is not enough.)
Change IP address besides
YES
default in MIU SETUP on
projector menu.
YES
It may be correct after
power off/on
YES
It may be correct after
power off/on
Setting of the WIRELESS
NETWORK. Change the
NO
WIRELESS NETWORK
setting to the factory default.
(Refer Fig.2)
IP:192.168.1.10, DHCP:off, CH:1, SSID:wireless,
ENCRYPTION:off, MODE,ADHOC,
NETWORK MODE:WIRELESS, SPEED:AUTO
NO
Setup IP of PC to "192.168.1.N".
16
Advertisement
Table of Contents
