Connecting The Tablet Pc To The Cradle - Fujitsu STYLISTIC R727 Operating Manual

Accessories for your Tablet PC (optional)

Connecting the Tablet PC to the cradle

It is possible to connect the Tablet PC to the cradle while it is running.
Disconnect the AC adapter from the Tablet PC before connecting the
Tablet PC to the docking cradle.
When the Tablet PC is connected to the cradle, you must connect
the AC adapter to the cradle.
Cradle
► Remove the AC plug of the AC adapter from the power outlet.
► Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC.
► Fold in the tablet stand so that it lies flat on the rear of the Tablet PC.
► Position the Tablet PC so that it lies against the storage surface of the cradle.
► Push the Tablet PC on to the docking cradle in the direction of the arrow (1)
until you feel it engage on the connector.
► Plug the AC adapter cable into the DC jack (DC IN) on the cradle (2).
► Connect the AC cable to the AC adapter (3).
► Plug the AC cable into the power outlet (4).
46
2
3
1
4
Fujitsu