FUNAI DBVR-2700 Service Manual page 16

[13] Power Supply CBA
[15] Deck Pedestal-2
[16] Side Bracket
HOW TO MANUAL EJECT
1. Remove the Top Case.
2. Make a tool from a paper clip, etc., (length = approxi-
mately 50 mm, maximum diameter = approximately 3
mm) as shown below.
3. Insert the tool into the manual eject hole on the DVD
Mecha. Then, push it until the tray is ejected.
Top Cover
1
DVD Mecha
Tray
4
Bracket
(S-11)
(S-13)
(S-14)
3
Deck Assembly
(S-12)
(S-11)
(W-1)
(L-3)
[17] Insulator (W-1)
Eject Hole
2
Length = approximately 50mm
1-6-5
(W-1)
[14] Deck Pedestal-1
Fig. D9
Paper clip (Available Locally)
Straightened
portion = approximately 35mm
H9308DC