Pnp/Pci Configurations - Gigabyte 7VT600P-RZ User Manual

ModemRingOn/WakeOnLAN (When AC Back Function set to [Soft-Off])
You can enable wake on LAN feature by the "ModemRingOn/WakeOnLAN" or "PME Event Wake
up" when the M/B has "WOL" onboard connector. Only enabled the feature by "PME Event Wake
up". An incoming call via modem awakes the system from its soft-off mode. When set at Enabled,
an input signal comes from the other client.
Server on the LAN awaks the system from a soft off state if connected over LAN.
Disabled Disabled Modem Ring On / Wake On LAN function.
Enabled Enabled Modem Ring On / Wake On LAN function. (Default Value)
Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
Disabled Disable this function. (Default Value)
Enabled Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Date (of Month) Alarm :
Time (hh: mm: ss) Alarm :

PnP/PCI Configurations

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PCI1/PCI5 IRQ Assignment
PCI2 IRQ Assignment
PCI3 IRQ Assignment
PCI4 IRQ Assignment
: Move Enter: Select
F5: Previous Values
7VT600P-RZ Series Motherboard
Everyday, 1~31
(0~23) : (0~59) : (0~59)
PnP/PCI Configurations
+/-/PU/PD: Value F10: Save
F6: Fail-Save Default
- 30 -
[Auto] Item Help
[Auto]
Menu Leve
[Auto]
[Auto]
ESC: Exit F1: General Help
F7: Optimized Defaults
l