Advertisement
Step 2:
Later, select Hard Disk Boot Priority under the Advanced BIOS Features menu. In the Hard Disk
Boot Priority submenu, select the model of the desired SATA hard drive onto which you intent to install
Microsoft Windows 2000/XP (Figure 2).
Step 3:
Set First Boot Device under the Advanced BIOS Features menu to CD-ROM to boot from CD-ROM
after system restarts (Figure 3).
Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Boot Up Floopy Seek
Password Check
Flexible AGP 8X
Init Display First
: Move
Enter: Select
F3: Language
F5: Previous Values
Step 4:
Save and exit BIOS Setup.
SATA Hard Drive Configurations (SiS 964)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Hard Disk Boot Priority
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Advanced BIOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Figure 2
[Press Enter]
[CDROM]
[Hard Disk]
[CDROM]
[Disabled]
[Setup]
[Auto]
[AGP]
F10: Save
Figure 3
- 4 -
ESC: Exit
F1: General Help
F7: Optimized Defaults
Advertisement
