Advertisement
Step 3:
If Setup correctly recognizes the driver in the floppy disk, a controller menu similar to Figure 19 below
will appear. If you want to install Windows XP, use the ARROW keys to select WinXP SiS Raid/IDE
Controller and press ENTER. (Select Win2000 SiS Raid/IDE Controller if you want to install Windows
2000.) Then it will begin to load the SATA driver from the floppy disk.
If a message appears saying one or some file(s) cannot be found, please check the floppy disk
or copy the correct SATA driver again from the motherboard driver CD.
Step 4:
When the screen as shown below appears, press ENTER to continue the SATA driver installation from
the floppy disk. The driver installation will be finished in about one minute.
Figure 19
Figure 20
- 13 -
SATA Hard Drive Configurations (SiS 964)
Advertisement
