Greenlee GATOR EK1550LX Operation Manual page 7

Adapter Kits (cont'd)
Procedure for Using Thomas & Betts TBM15 Dies;
48788 Die Holder Kit
1. Install the upper 48789 die holder assembly in hole
in top of "C" head. Snap in place with top die holder
retaining spring plunger (6).
2. Install lower 48789 die holder assembly in hole in
end of piston. Snap in place with bottom die holder
retaining spring plungers (6).
3. Select proper die set for fitting to be crimped.
4. Slide top die into place in die holder while depress-
ing die retainer button. Release die button while it
snaps into place, locking die into position. Repeat
operation for other die entry.
TOP DIE
HOLDER
48789 TBM15 DIE
RETAINING
HOLDER ASSEMBLIES
SPRING
PLUNGER (6)
TOP DIE
RETAINING
MECHANISM
48788 Die Holder Kit contains:
(2) 48789 Die Holders
Greenlee Tools, Inc.
EK1550LX Battery-powered Crimping Tool
Procedure for Using Burndy Y46 Dies;
48820 Die Holder Kit
1. Install the upper 48822 die holder assembly in hole
2. Install lower 48821 die holder assembly in hole in
3. Select proper die set for fitting to be crimped.
4. Slide top die into place in die holder while simulta-
BOTTOM DIE
HOLDER RETAINING
SPRING PLUNGERS (6)
BOTTOM DIE
RETAINING MECHANISM
48822 Upper Die Holder and 48821 Lower Die Holder
7
in top of "C" head. Snap in place with top die holder
retaining spring plunger (6).
end of piston. Snap in place with bottom die holder
retaining spring plungers (6).
neously squeezing both retainer buttons. Release
buttons and allow them to snap into place. Repeat
operation for other die entry.
48822 Y46 DIE
HOLDER ASSEMBLY
TOP DIE
RETAINING
MECHANISM (2)
TOP DIE HOLDER
RETAINING SPRING PLUNGER (6)
48820 Die Holder Kit contains (1) each:
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
BOTTOM DIE
HOLDER RETAINING
SPRING PLUNGERS (6)
BOTTOM DIE
RETAINING
MECHANISM (2)