Table of Contents
Advertisement
Installation Guide for the NETGEAR 54 Mbps Wireless PC Card WG511V2H1
Enter the SSID. This is also called the Wireless Network Name.
b.
Note: You will not get a wireless network connection unless the network SSID matches
exactly what is configured in the access point.
Tip: You can click the Site Survey tab to view a list of the available wireless networks and
their SSIDs at the location where you are.
3. Save your settings in a Profile.
Click the Profiles tab to view the screen below.
a.
Figure 3-8: Profiles tab page
Type a descriptive name for the Profile Name.
b.
Click the Save button to save this profile. All the configuration settings are saved
c.
in this profile.
Click Activate to activate your settings.
d.
Click OK to exit the configuration utility.
e.
Run the Configuration Utility and select the Encryption tab page.
1.
Configuration
3-31
Advertisement
Table of Contents
