Operation - Husky H52CH6HD Use And Care Manual

52 inch-15 drawer tool chest and cabinet set
Table of Contents

Advertisement

4
Attaching Plastic Feet (Optional)
NOTE: 4 Plastic Feet are located in bag
found in top till.
Insert plastic foot into hole on bottom of chest.
Repeat for other 3 feet.

Operation

1
Removing the drawers
Fully extend the empty drawer.
Push up the one release lever while pulling down
on the other release lever.
Pull the drawer outward until it is released from the
drawer slide.
3
Usage of top till rubber grommet
When passing cords into the box, be sure to always
enter box from the rear. After head of cord is in place,
slightly pull back 2-3" to ensure weather resistant "star
bursts" are facing toward the outside of box. Never
push the cord from inside box so that mating plug
points are exposed to the environment.
BE SURE TO FOLLOW ALL ELECTRICAL SAFETY
PRECAUTIONS.
2
Re-inserting the drawers
Extend the drawer slides.
Insert the brackets on each side of the drawer into
the slots in the slides, being careful that they are
properly positioned.
Once properly inserted, completely close the drawer
to set the slides in their proper positions.
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H52tr9hdH52ch6tr9hd100280692610028069271002765707

Table of Contents