Assembly - Husky H52CH6HD Use And Care Manual

Assembly

Two people are recommended for assembly.
CAUTION:
1
Attaching the cabinet handle
□
Position the cabinet handle (C) over the holes on the
cabinet (B).
□
Attach with the bolts (CC) and tighten with supplied
hex key (DD).
The holes in the cabinet are tapped and do not
NOTE:
require nuts.
There are holes to mount handle on both sides
NOTE:
of cabinet, but only one handle is provided.
3
Attaching the casters
CAUTION:
□ Be sure the drawers are locked and lay the cabinet (B) on its top. Use packaging material to protect the finish.
□ CASTER CONFIGURATION #1: UNIT WILL PRIMARILY BE STATIONARY
•Attach 2 swivel casters (E) to the cabinet (B), on the same side as the handle (C) and attach the other 2 swivel casters (E)
to the opposite side of the cabinet (B). Insert bolts (AA) through washers (BB) and swivel caster (E) into the cabinet (B).
•Attach 2 fixed casters (D) to the center of the cabinet (B) by inserting bolts (AA) through the washers (BB) and the fixed
casters (D) into the cabinet (B).
B
CC
Do not over tighten the bolts.
2
Attaching the bottle opener
□
Position the bottle opener (F) over the holes on the
cabinet (B).
□
Attach with the bolts (CC) and tighten with supplied
hex key (DD).
CAUTION:
C
6
Do not over tighten the bolts.
B
C
CC
F