Telephone Settings - AT&T EL52310 Quick Start Manual

Telephone settings

Use menu structure on page 8 to find and set features. Many are simple yes/no
questions. The following are a few examples of common features to set. Refer to
Handset settings and answering system settings in the online user's manual for
detailed instructions on setting all telephone features.
ringer volume
Set the ringer volumes, individually on each handset and the telephone base.
Handset:
You can set the handset ringer volume level, or turn the ringer off. When the ringer is off,
appears on the handset screen.
1. On a handset, press mEnU/
>rIngErS and then select >rIngEr voLUmE.
2. Press or
DIr
/SELECT to save your preference.
3. Press
mEnU
:
note
If the handset ringer volume is off, that handset ringer is silenced
for all incoming calls; however, that handset still plays the paging tone
when you use the handset locator feature.
Telephone base:
When the telephone is not in use, press
telephone base to adjust the ringer volume.
Date and time
The answering system announces the day of the week and time of each message
received prior to playing it. If you subscribe to caller ID service, the day, month and time
are set automatically with each incoming call. However, the year must be set so that the
day of the week can be calculated from the caller ID information.
On a handset, press mEnU/
1.
>SET DaTE/TImE.
2. Press the dial pad keys (0-9) to enter two-digit numbers for the month, day and year.
Press /SELECT.
mEnU
3. Press the dial pad keys (0-9) to enter two-digit numbers for the hour and minute.
4. Press or
DIr
SELECT
to sample each volume level.
CID
SELECT
to choose am or Pm. Press
CID
in idle mode. Select
voLUmE on the
in idle mode. Select >SETTIngS and then select
mEnU

/SELECT to confirm.
RINGER VOLUME