JVC KY-PZ1OOWE Instructions Manual page 66

Time Style
For setting the time display on the web browser
(Live View) screen and externally connected
monitor screen as well as that for time stamp
recording.
[Setting Values: 24hour, 12hour]
(Default values: 12hour (U model), 24hour (E
model))
IR ID
For selecting a camera ID when operating via an
infrared remote control unit.
[Setting Values: CAM3, CAM2, RCAM1]
Tally Lamp
For setting whether to light up the tally lamp during
external control, recording or live streaming.
External:
0
Lights up during external control.
Rec/Live Streaming:
0
Lights up during recording or live streaming.
Live Streaming:
0
Lights up during live streaming. Does not light
up during recording.
Rec:
0
Lights up during recording.
Off:
0
Turns off the indicator.
[Setting Values: RExternal, Rec/Live Streaming,
Live Streaming, Rec, Off]
Memo :
Depending on the setting, the lamp might appear
blinking such as when there is insufficient space on
the microSD card during recording or when a
communication error occurs during live streaming.
(A P25 [Tally Lamp] )
9 Brightness
For setting the brightness of the tally lamp.
Selecting "High" increases the brightness level to
the maximum.
[Setting Values: RHigh, Middle, Low]
Language
Switches between languages in the menu screen.
[Setting Values: REnglish, Français, Español] (U
model)
[Setting values: REnglish, Français, Deutsch,
Italiano, Español, Pусский, Türkçe, 中文(简)] (E
model)
66
System Menu
Reset All
Resets all menu settings.
Memo :
[Date/Time] and [Time Zone] cannot be reset.
0
(A P66 [ Date/Time ] )
(A P66 [ Time Zone ] )
This item is not available during recording in the
0
Camera mode or during live streaming.
Date/Time
For setting the year, month, day, hour, and minute.
Memo :
The display order of the date (year, month, day)
0
follows the setting in [Display Settings] B [Date
Style]. However, the 24-hour format is used for
the hour display regardless of the [Time Style]
setting.
(A P65 [ Date Style ] )
Time Zone
For setting the UTC time difference in units of 30
minutes.
[Setting Values: UTC-12:00-UTC-00:30, UTC,
UTC+00:30-UTC+14:00 (in 30 min increments)]
(Default values: UTC-05:00 (U model), UTC (E
model))
Memo :
If [Date/Time] is already set, the [Date/Time]
0
item is automatically adjusted when [Time
Zone] is altered.