JVC KY-PZ1OOWE Instructions Manual page 19

Operation Mode
Camera Mode This is the camera shooting mode. The camera recorder starts up in Camera mode
0
when the power is turned on.
Video images from the camera are output to a browser (Live View) screen or an
0
externally connected monitor. When a recordable microSD card is inserted, the
camera recorder enters the recording standby mode.
Press the [REC] button to start recording.
0
Memo :
When shifting from the Video Off mode to the camera mode, it may take a while
0
for the camera to complete the initial operation and output the video images.
Remote Edit This mode enables the list display and editing of the recorded clip data through
0
Mode access to the clip list display page via a web browser on a PC.
When you access via a web browser on a PC, "It is necessary to change the camera
0
mode to "Remote Edit Mode". Change the mode." appears on the web browser.
At the same time, "Change to Remote Edit Mode?" appears on the screen of the
device that is connected to the video output terminal.
Selecting [Change] switches to the Remote Edit mode, and enables display of the
clip list and editing of the clip metadata.
(A P81 [ Clip Metadata ] )
(A P83 [Uploading a Recorded Video Clip] )
Memo :
If you access via the web browser of a PC while recording is in progress, the
0
message appears after recording stops.
Maintenance This is a mode for running Load or Store with respect to firmware update or the
0
Mode setup file.
Stops output from the video output terminal. (Black screen display)
0
Memo :
This mode is only available when operating from a web browser screen.
0
Upon shifting to this mode, all card recording, live streaming and Live View
0
operations will stop.
Video Off Mode This mode indicates that operation is stopped.
0
Stops output from the video output terminal. (Black screen display)
0
Memo :
Upon shifting to this mode, all card recording, live streaming and Live View
0
operations will stop.
Description
19
Operation Modes