JVC KY-PZ1OOWE Instructions Manual page 64

Metadata Server
For registering the FTP server for importing the
metadata and the path of the file to be imported.
Up to 4 settings can be registered.
9 Meta-FTP1 to Meta-FTP4
(The name specified in the respective
[Alias] items is displayed)
o Alias
For setting a name to distinguish the settings of
this camera recorder.
The name set in this item will be displayed in the
[Import Metadata] options.
* Enter not more than 31 characters.
o Protocol
For setting the protocol of the FTP server to be
connected.
FTP:
0
Protocol that does not encrypt the incoming
and outgoing data.
SFTP:
0
Protocol that encrypts incoming and outgoing
data using SSH.
FTPS:
0
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an implicit
mode (starts encrypted communication once
connection starts).
FTPES:
0
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an explicit
mode (starts encrypted communication after
permission is granted).
[Setting Values: RFTP, SFTP, FTPS, FTPES]
o Server
For setting the server name ("mystation.com",
etc.) or the IP address ("192.168.0.1", etc.) of the
FTP server.
* Enter not more than 127 characters using
single-byte alphanumeric characters (a to z, 0 to
9), single-byte hyphen [-], or dot [.].
64
Network Menu
o Port
Enter the FTP server port number to use using
an integer between 1 and 65535.
The default value varies with the Protocol
setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21)
o File Path
Enter the path name for the metadata file ("/pub/
meta.xml", "/home/user/meta2.xml", etc.)
* Enter not more than 127 characters.
o Username
Enter the user name for connecting to the FTP
server.
* Enter not more than 31 characters.
o Password
Enter the password for connecting to the FTP
server.
* Enter not more than 31 characters.
o PASV Mode
For setting whether to set the communication
mode used for file transfer to the passive mode.
Set to "On" if the camera is inside a firewall, and
a connection from the FTP server to the camera
cannot be established.
[Setting Values: On, ROff]
Memo :
When [Protocol] is set to "SFTP", this item
0
appears as "---" and cannot be selected.
9 Import Metadata
For importing metadata from the FTP server.
0
Metadata loaded by the setup files will be
0
deleted.
Memo :
This option is not available when [Network] is set
0
to "Off".
Reset Network Settings
Restores all items in the [Network] menu to their
default settings.