Table of Contents
Advertisement
About Indicators
The ON/STANDBY or WARNING indicator lights up or flashes if there is any trouble with your projector.
Flashing/Lighting indicators
(Lights in red)
(Flashes in red)
(Flashes in red) (Flashes in red)
Both indicators flash
Note
If the indicator starts flashing in a way of other than the above, and the symptom persists even after carrying out the above methods, consult
with qualified Sony personnel.
ON/STANDBY
WARNING
indicator
indicator
The number of
Cause and Remedy
flashes
Three times
The unit does not light properly due to an abnormality of the light source and light
source power. Turn off, then turn on the power after a while.
If the symptom persists, consult qualified Sony personnel.
Six times
The unit detects a drop impact.
If there is abnormality on the unit, consult with qualified Sony personnel.
If there are no abnormalities on the unit, disconnect the AC power cord and check
that the ON/STANDBY indicator turns off, then connect the AC power cord and
turn the unit on.
Eight times
The lens is not securely attached.
Twice
The internal temperature is unusually high. Check to ensure that nothing is blocking
the ventilation holes and the unit is not being used at high altitudes.
37
Advertisement
Table of Contents
