Table of Contents
Advertisement
Section 3 - Configuration
This will allow you to open a single port or a range of ports. Click Save Settings to apply your settings.
Rule:
Check the box to enable the rule.
Name:
Enter a name for the rule. You can also choose from the
Application Name drop-down box.
IP Address:
Enter the IP address of the computer on your local network
that you want to allow the incoming service to. You can also
choose from the Computer Name drop-down box.
Public Port/
Enter the port or range of ports that you want to open. If you
Private Port:
want to open one port, enter the same port in both boxes.
Traffic Type:
Select TCP, UDP, or Any to specify the protocol.
D-Link DIR-605L User Manual
Advanced
Advanced Port Forwarding Rules
30
Advertisement
Table of Contents
