Answering System Settings - Panasonic KX-TGD512 Operating Instructions Manual

Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Key Operation
1 Repeat message (during
*1
playback)
2 Skip message (during playback)
4 Play new messages
5 Play all messages
9
Stop playback
Start voice guidance
0 Turn answering system off
*4 Erase currently playing message
*5 Erase all messages
*# End remote operation
(or hang up)
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 For English voice guidance only
*3 For Spanish voice guidance only
Turning on the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
Let the phone ring 15 times.
R A long beep is heard.
3
Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 36).
For assistance, please visit http://shop.panasonic.com/support
TGD51x_OI(en)_1007_ver002.pdf 37

Answering system settings

Call screening
While a caller is leaving a message, you can
listen to the call through the unit's speaker.
To adjust the speaker volume, press MDN or
MCN repeatedly.
You can answer the call by pressing M
the handset.
Call screening can be set for each unit. The
default setting is "On".
1
*2
*3
2
Number of rings before the unit
answers a call
You can change the number of times the
phone rings "Ring count" before the unit
answers calls. You can select 2 to 7 rings, or
"Toll saver".
The default setting is "4 rings".
"Toll saver": The unit's answering system
answers at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
to listen to new messages (page 36), you
know that there are no new messages when
the phone rings for the 3rd time. You can then
hang up without being charged for the call.
1
2
Caller's recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is "3 min".
1
2
Answering System
MMENUN#310
MbN: Select the desired setting. a
MSAVEN a MOFFN
MMENUN#211
MbN: Select the desired setting. a
MSAVEN a MOFFN
MMENUN#305
MbN: Select the desired setting. a
MSAVEN a MOFFN
N on
37
2016/10/07 10:05:47