REPLENISHING SUPPLIES
Master Roll Replacement
The Master End indicator (C) is lit
when it is time to replace the master
roll.
A
Open the original table.
4
Note
Lift the original table release le-
ver and lift the original table.
B
Open the right side cover.
C
Open the plotter cover.
74
D
Remove the used master roll and
pull out both spools. Then, insert
both spools into a new master
roll.
TSLH01SE
Note
When the Master End indicator
lights, it is necessary to replace
the master roll even if some
master remains on the old roll.
E
The new master roll must be po-
sitioned as shown in the illustra-
tion.
TSLH01TE
TSLH02EE
TSLT010E
TSLH01XE