Savin 5308L Operating Instructions Manual page 78

SP No. Mode
21 PRINTS/MASTER
COST
25 CLEAR 2 IN 1
29 PHT BCKGRND COR-
RECT
40 ORIGINAL
Changing The Settings Of Service Programs
Function
The optional key counter usually counts the num-
ber of prints made regardless of the number of
masters used. For accounting purposes, it is possi-
ble for the key counter to be incremented by a val-
ue between 0 and 50 whenever a new master is
used.
Example: The key counter is adjusted to increase
by 20 for each master fed. If 100 copies have been
made and the master is replaced, the key counter
will increase by 120.
Note
Default: 0
Adjustment value: 0 – 50
By default, when master making is finished in
Combine Copies mode, this mode stays selected
for the next master making.
If you want master making turned off, select "1".
Note
Default: 0
Adjustable value: 0: No 1: Yes
Even if you select "1" in this mode, Combine
Copies mode is not cleared when the next orig-
inal are set in the optional document feeder.
For details about Combine Copies, See
"Combine Copies—Combining 2 Originals Into
One Print".
When you make prints in Photo or Letter/Photo
mode, the background of the prints might become
dirty. You can prevent this using this function.
Note
Default: 0
Adjustment value: 0: No 1: Yes
Specifies the image mode at power on.
Note
Default: 0
Adjustment value:
• 0: Letter mode
• 1: Letter/Photo mode
• 2: Photo mode
3
P.32
57