Service Program Mode; Accessing Service Programs - Savin 5308L Operating Instructions Manual

3. SERVICE PROGRAM MODE

Accessing Service Programs

The service programs can be set by
following this procedure.
Reference
For the service program menu, see
P.55 "Service Program Menu".
A
Press the { { { { Clear Modes} } } } key.
B
Hold down the { { { { Clear/Stop} } } } key
for at least 3 seconds.
The SP-mode display appears on
the guidance display.
Note
If you press the wrong key, try
pressing the above keys from
the beginning.
C
With the { { { { Number} } } } keys, enter the
desired service program number
(SP No.).
Reference
For the SP No., see
vice Program Menu".
TSLS01UN
When you want to leave the
service program mode
A Press the { { { { Clear Modes} } } } key.
TSLS01AN
Reference
If you want to change the set-
tings of a selected service
program, see
ing The Settings Of Service
Programs".
TSLS011N
P.55 "Ser-
TSLS01UN
P.54 "Chang-
53