Table of Contents
Advertisement
20
SYSTEM SETUP: BASIC
Sets a language for the OSD menus. Use
Language
select your preferred language.
Background
Sets the background color for the projector.
Color
Use this function to select your desired startup screen. If you
Splash Screen
change the setting, it will take effect when you exit the OSD
menu.
The projector will automatically shut down while there is no
Auto Power Off
signal input detected after the time you set.
Direct Power
Allows the projector to turn on automatically once the power
On
is fed through the power cord.
Selecting "On" enables the function. The MHL port(s) and the
DC 5V out port/USB A port (if available) on the projector can
output 5V power when the projector is turned on.
DC 5V Out
(Standby)
•
•
Menu Settings
•
Rename Input
Renames the current input source to your desired name.
Auto Input
Allows the projector to detect your source automatically.
Search
Only MHL port(s) will provide power output when
MHL port(s) and USB A port are both plugged.
Menu Position: Sets the On-Screen Display (OSD) menu
position.
Menu Display Time: Chooses the length of time the OSD
menu will remain active after your last key press.
Reminder Message : Sets the reminder messages on or
off.
to
Advertisement
Table of Contents
