Table of Contents
Advertisement
SMART FUNCTIONS
Configure system settings
To configure Android system settings, click
Select a menu item to configure its preferences.
Network & Internet & Bluetooth
Note:
Before configuring the network settings, make sure the Wi-Fi dongle is connected to the USB port on the
rear of the projector.
To connect the projector to an available Wi-Fi network, do the following:
1.
Slide the Wi-Fi switch from Off to On.
2.
Select your preferred access point from the Wi-Fi list and click on it to make the connection.
3.
If the selected Wi-Fi network is secured, you are prompted to enter a password. Enter the password
and then click Connect.
8
English
Setting on the Home page.
Advertisement
Table of Contents
