Table of Contents
Advertisement
AdonisC2_ENcopy122F_FM.book Page 50 Thursday, February 15, 2001 3:23 PM
Copying
Staple
The optional finisher and the bridge unit are required to use this function.
Each copy set can be stapled together.
2
Limitation
❒ You cannot use the following paper in this function:
• Postcards
• Translucent paper
• OHP transparencies
• Adhesive labels
• Curled paper
• Low stiffness paper
• Paper of different vertical sizes
Note
❒ For this mode, the following limitation applies. When the number of copies
exceeds the tray capacity, copying stops. In this case, remove the copies from
the shift tray and then resume copying.
❖ ❖ ❖ ❖ Metric version
Paper size
Stapler
capacity
Shift tray
capacity
*1
(A4K)
*1
Depending on the number of sheets to be stapled and whether sheets have
punched holes or not, the maximum tray capacity might be reduced.
50
With 1000-Sheet Finisher
A3L, B4L, A4KL, B5K
• A4 or smaller: 30 sheets (80g/m
• B4 or larger: 20 sheets (80g/m
2
1,000 sheets (80g/m
)
With 2 Tray Finisher
A3L, B4L, A4KL, B5KL
2
)
• A4 or smaller: 50 sheets (80g/m
2
)
• B4 or larger: 30 sheets (80g/m
• Mixed Size: 30 sheets (80g/m
• Finisher shift tray 1: 500 sheets
2
(80g/m
)
• Finisher shift tray 2: 1,500 sheets
2
(80g/m
)
2
)
2
)
2
)
Advertisement
Table of Contents
