Setting Custom Size Originals - Savin 2235 Operator's Manual

AdonisC2_ENcopy122F_FM.book Page 35 Thursday, February 15, 2001 3:23 PM
A
Press the [Special Original] key.
B
Press the [Mixed size] key.
C
Press the [OK] key.
D
Align the rear and left edges of
the originals as shown in the il-
lustration.
1
1: Set into the document feeder.
2: Vertical size
E
Adjust the guide to the widest
original size.
F
Set the aligned originals face up
into the document feeder.
G
Press the { { { { Start} } } } key.

Setting Custom Size Originals

When setting custom size originals in
the document feeder, specify the size
of the originals.
Limitation
❒ The paper size that can be set with
this function is vertical 128-297mm
(5" – 11"), horizontal 128-1,260mm
(5" – 49").
A
Press the [Special Original] key.
B
Press the [Custm Size Origi.] key.
2
C
Enter the horizontal size of the
CP19AN
original with the Number keys,
then press the [#] key.
Setting Originals
2
35