Restarting The Tcl• Roku; Resetting The Tcl• Roku - TCL 49FP110 User Manual

Restarting the TCL• Roku TV
You can restart the TV when necessary. Restarting has the same effect as unplugging the TV power and
then plugging it in again.
To restart the TV, navigate to Settings > System > Power and then move right to System restart and
then Restart. Press OK to confirm restart.
While the TV restarts, the screen goes dark for a few seconds, and then displays the startup screen for a
few more seconds. When the restart operation is complete, you'll see the familiar Home screen.
Resetting the TCL• Roku TV
You can choose to reset only the TV picture and audio settings to their original values, or perform a full
factory reset to return the TV to the state it was in when you first unpacked and turned it on.
Reset TCL• Roku TV settings
To reset only the TV picture and audio settings to their original values, navigate to Settings > System >
Factory Reset, and then highlight Reset TV settings. Read the information on the screen to make sure
you understand what the reset operation does.
To proceed with the reset operation, press PLAY/PAUSE three times in a row.
Factory reset everything
A full factory reset returns the TV to its original, out-of-the-box state. When finished, you must repeat
Guided Setup, reconnecting to the Internet, re-linking your Roku account, and reloading any streaming
channels. You also must repeat Antenna TV setup and input configuration.
Factory reset is the recommended choice if you want to transfer the TV to another owner, and is the
only choice if you want to switch from store mode to home mode (if you inadvertently selected store
mode during Guided Setup).
To perform a factory reset, navigate to Settings > System > Factory reset, and then highlight Factory
reset everything. Read the information on the screen to make sure you understand what this reset
operation does.
To proceed with the full factory reset, press PLAY/PAUSE three times in a row.
Page 65