Ac Power - TCL 49FP110 User Manual

Connecting an AV receiver or digital sound bar to the TCL• Roku TV
You can enjoy Dolby Digital multichannel sound from your TV if you connect a digital amplifier in
either of two ways:
Digital optical audio out (S/PDIF) – Connect a TOSLINK optical cable (not provided) from
•
the TV to the Optical input on your receiver or sound bar.
®
HDMI ARC – Connect an HDMI
•
®
the HDMI input on your receiver or sound bar. This connection uses the Audio Return
Channel (ARC) feature of the HDMI
compatible device. To use this feature, you must configure the TV to enable HDMI
as explained in "Enabling HDMI® ARC" on page 63.
Preparing the TCL• Roku TV for Internet connectivity
If you want to connect your TV to the Internet to watch streaming content, you must connect using a
wireless modem/router or a wireless access point. The TV connects through a built-in wireless LAN
adapter. The TV does not support a wired connection or the use of a USB network adapter.
We recommend that your wireless connection support the IEEE 802.11b/g/n specification for the best
experience.

AC power

Plug your TV into a power outlet. You can tell that the TV has power because the status light on the
front of the TV lights up.
"TCL• Roku TV status light" on page 30 explains how the status indicator shows what is happening with
the TV.
®
cable (not provided) from the HDMI (ARC) connector to
®0
specification to output sound from the TV to a
Page 10
®
ARC,