TCL 40S5400A Manual

TCL 40S5400A Manual

Hide thumbs Also See for 40S5400A:

Advertisement

Important information

Safety
Ensure that your domestic mains supply voltage
matches the voltage indicated on the identification
sticker located at the back of your set. Where the
mains plug, AC inlet or an appliance coupler is used
as disconnect device, it shall remain readily operable.
On certain models, the light indicator is located at the
side of the TV set. The absence of a light indication
at the front does not mean that the TV set is fully
disconnected from the mains. To disconnect the TV
set completely, the mains plug must be pulled out.
The TV set's components are sensitive to heat. The
maximum ambient temperature should not exceed
35º Celsius. Do not cover the vents at the back or
sides of the TV set. Leave sufficient space around it to
allow adequate ventilation. Install the appliance away
from any source of heat (fireplace, etc.) or appliances
creating strong magnetic or electric fields.
Moisture in rooms where the set is installed should
not exceed 75% humidity. Moving the set from a cold
place to a warm one can cause condensation on the
screen (and on some components inside the TV set).
Let the condensation evaporate before switching the
TV set on again.
or POWER/ button on the TV set or the
The
button on the remote control can be used to switch it
on and put it into standby mode. If you are not going
to be watching the TV for a lengthy period of time,
switch it off completely by removing the plug from the
mains power socket.
During thunderstorms, we recommend that you
disconnect the TV set from the mains and aerial so
that it is not affected by electrical or electromagnetic
surges that could damage it. For this reason, keep the
mains and aerial sockets accessible so they can be
disconnected, if necessary.
Unplug the TV set immediately if you notice it giving
off a smell of burning or smoke. You must never,
under any circumstances, open the TV set yourself,
as you run the risk of an electric shock in doing so.
WARNINGS
This appliance is intended for domestic household
use only and should not be used for any other
application, such as for non-domestic use or in a
commercial environment.
If the external flexible cable or cord of this product is
damaged, it shall be replaced by the manufacturer or
his service agent or a similar qualified person in order
to avoid a hazard.
Leave more than 10cm clearance around the
television to allow adequate ventilation. The
ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
table-cloths, curtains, etc.
The apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases shall be placed on the apparatus.
Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire
or the like.
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
A television set may fall, causing serious personal
injury or death. Many injuries, particularly to children,
can be avoided by taking simple precautions such as:
• ALWAYS use cabinets or stands or mounting
methods recommended by the manufacturer of the
television set.
• ALWAYS use furniture that can safely support the
television set.
• ALWAYS ensure the television set is not
overhanging the edge of the supporting furniture.
• ALWAYS educate children about the dangers of
climbing on furniture to reach the television set or its
controls.
• ALWAYS route cords and cables connected to your
television so they cannot be tripped over, pulled or
grabbed.
• NEVER place a television set in an unstable
location.
• NEVER place the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television set to
a suitable support.
• NEVER place the television set on cloth or other
materials that may be located between the television
set and supporting furniture.
• NEVER place items that might tempt children to
climb, such as toys and remote controls, on the top
of the television or furniture on which the television
is placed.
If the existing television set is going to be retained
and relocated, the same considerations as above
should be applied.
Equipment with this symbol is a Class II or
double insulated electrical appliance. It has
been designed in such a way that it does
not require a safety connection to electrical
earth.
Equipment without this symbol is a Class I
electrical appliance. It shall be connected
to a mains socket outlet with a protective
earthing connection.
To prevent the spread of fire, keep candles
or other open flames away from this product
at all times.
EN 1

Advertisement

Table of Contents
loading

Summary of Contents for TCL 40S5400A

  • Page 1: Important Information

    Important information Safety table-cloths, curtains, etc. Ensure that your domestic mains supply voltage The apparatus shall not be exposed to dripping or matches the voltage indicated on the identification splashing and no objects filled with liquids, such as sticker located at the back of your set. Where the vases shall be placed on the apparatus.
  • Page 2 Important information This symbol indicates that high voltage is interruptions in audio reception, you should restart present inside. It is dangerous to make any your Bluetooth device to find frequency with less kind of contact with any internal part of this interferences and if you continue to face issues you product.
  • Page 3 Applies to products intended for the UK market. prevent potential negative effects on Hereby, TCL declares that the radio equipment type TV is in the environment and human health compliance with the relevant UK statutory requirements. The...
  • Page 4: Table Of Contents

    Contents Important information ………………………………… 1 Networked waking up ……………………………… 12 Software update …………………………………… 12 Chapter 1 - Connections Reset to factory default settings…………………… 13 Connect the power and antenna …………………… 5 Viewing pictures, playing music and watching videos from a USB storage device ………………………… 13 Connect Blu-ray Disc player, HD game console, HD camcorder, headphones, CI module …………………...
  • Page 5: Chapter 1 - Connections

    Chapter 1 - Connections Connect the power and antenna To switch on TV after connecting power cord, press or POWER/ . Notes: - Position of power socket varies according to TV model. - Disconnect the power cord before connecting devices. Cable Connect Blu-ray Disc player, HD game console, HD camcorder, headphones, CI module...
  • Page 6: Connect To The Internet

    Connections Connect to the Internet Note: The following instructions are just the usual ways to connect your TV to the wired or wireless network. The connection method may be different depending on your actual network configuration. If you have any questions about your home network, please refer to your Internet service provider.
  • Page 7: Chapter 2 - Getting Started

    To switch the sound off and back on. Standby / quit standby. Numeric buttons To enter channel numbers or a digit. To access TCL Channel. LIST To display the channel list. To control the volume. To display programme information, if available.
  • Page 8: Switch The Tv On And Off

    Getting started Important: Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Remove batteries when the remote control is not to be used for a long time. Batteries left in equipment may cause damage through deterioration and corrosive leakage, invalidating the guarantee.
  • Page 9: Chapter 3 - Basic Tv Operations

    Chapter 3 - Basic TV operations Accessing channels 3. Press to return to the homepage. Note: Since the connection with Internet takes Using the numeric buttons: press the corresponding time, it’s recommended that you wait a few numeric buttons on the remote control to access the minutes to use the Smart TV feature after channels.
  • Page 10: Chapter 4 - Using More Of Your Tv

    Chapter 4 - Using more of your TV Installing channels 1. Following the directions printed on the common interface module, gently insert the module into the This section describes how to search and store common interface slot on the TV. channels automatically.
  • Page 11: Using Teletext

    Using more of your TV Selecting a subtitle type on digital TV Using Auto standby channels Enables all CEC devices to automatically go to the standby mode when you turn off the TV with the TV 1. Press on the remote control, select Channel > remote.
  • Page 12: Hbbtv Deactivation

    Using more of your TV HbbTV deactivation ovens might interfere with Bluetooth audio streaming. If you face interruptions in To avoid disturbances that may be caused by HbbTV audio reception, you should restart your broadcasting tests, you can turn off the HbbTV Bluetooth device to find frequency with less function: interferences and if you continue to face...
  • Page 13: Reset To Factory Default Settings

    Using more of your TV - Do not switch off or unplug the TV until the upgrade is completed. - Keep successful network connection during upgrade. > Device Press on the remote control,select Preferences > About > Software update and press OK to enter.
  • Page 14: Chapter 5 - Other Information

    • Make sure the remote sensor window on the TV GNU software: dosfstools front is not under strong fluorescent lighting. [Legal Statement] of TCL - manufacturer of this • Try to clean the remote sensor window on the TV TV set front with a soft cloth.
  • Page 15 TCL may impose limits on the use of owner or service provider, you may not modify, copy, or access to certain services or content, in any republish, upload, post, transmit, translate, sell, create case and without notice or liability.

This manual is also suitable for:

40s5403a

Table of Contents