Onkyo TX-RZ1100-B Basic Manual page 51

> Specifications > Settings
the volume of the different sound ranges for each of the speakers. You can set three
different equalizers in Preset 1 to 3. You can select up to five bands for the Subwoofer and
nine bands for all other speakers.
Setting Item Default Value
Front 0.0 dB
Center 0.0 dB
Height 1 0.0 dB
Height 2 0.0 dB
Surround 0.0 dB
Surround Back 0.0 dB
> Listening Modes > Playback Function
Setting Details
After selecting the speaker frequency from
between 25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between
"－6.0 dB" and "＋6.0 dB" with / .
After selecting the speaker frequency from
between 25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between
"－6.0 dB" and "＋6.0 dB" with / .
After selecting the speaker frequency from
between 25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between
"－6.0 dB" and "＋6.0 dB" with / .
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
After selecting the speaker frequency from
between 25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between
"－6.0 dB" and "＋6.0 dB" with / .
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
After selecting the speaker frequency from
between 25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between
"－6.0 dB" and "＋6.0 dB" with / .
After selecting the speaker frequency from
between 25 Hz" and "16 kHz" with the cursors
/ , adjust the volume of that frequency between
"－6.0 dB" and "＋6.0 dB" with / .
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Setting Item Default Value
Subwoofer 0.0 dB
• The result may not be as expected depending on the input source and listening mode setting.
■ 7� THX Audio
Setting item Default Value
Back Speaker >4.0 ft/>1.2 m
Spacing
THX Ultra2 / No
Select2 Subwoofer
> Basic Manual
Troubleshooting Appendix Troubleshooting | Appendix
Setting Details
After selecting the speaker frequency from
between 25 Hz" and "160 Hz" with the cursors
/ , adjust the volume of that frequency between
"－6.0 dB" and "＋6.0 dB" with / .
• This cannot be selected if "No" is set in
"Configuration" - "Subwoofer".
Setting Details
Select the distance between the surround back
speakers from "<1.0 ft/<0.3 m", "1.0 - 4.0 ft/0.3 -
1.2 m", and ">4.0 ft/>1.2 m".
• The unit of distance (feet / meters) shown is the
unit selected for use in "Distance".
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
• If an item cannot be selected even though
connection is correct, check that the settings in
"Configuration" - "Speaker Channels" matches
the number of connected channels.
Set "Yes" or "No" of the connection of the THX
certified subwoofer.
"Yes": When a THX-certified subwoofer is
connected
"No": When a THX-certified subwoofer is not
connected
• The setting cannot be changed if "Configuration"
- "Subwoofer" is set to "No".
|
15