Onkyo TX-RZ1100-B Basic Manual page 50

> Specifications > Settings
Setting Item Default Value
Front Right 0.0 dB
Height 1 Left 0.0 dB
Height 1 Right 0.0 dB
Height 2 Left 0.0 dB
Height 2 Right 0.0 dB
Surround Right 0.0 dB
Surr Back Right 0.0 dB
14
> Listening Modes > Playback Function
Setting Details
Select a value between "－12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Select a value between "－12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Setting Item Default Value
Surr Back Left 0.0 dB
Surround Left 0.0 dB
Subwoofer 1 0.0 dB
Subwoofer 2 0.0 dB
■ 5� Dolby Enabled Speaker
Setting Item Default Value
Dolby Enabled 6' 0" / 1.80 m
Speaker to
Ceiling
AccuReflex Off
• This setting can be selected when "Configuration" - "Height 1 Speaker"/"Height 2 Speaker" is set to
"Dolby Speaker".
■ 6� Equalizer Settings
You can adjust the output volume of the range of each connected speaker. You can adjust
> Basic Manual
Troubleshooting | Appendix
Setting Details
Select a value between "−12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Select a value between "－12.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Select a value between "−15.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Select a value between "−15.0 dB" and "＋12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Setting Details
Set the distance between the Dolby Enabled
Speaker and the ceiling. Select between " 0' 0" 1/2
"/"0.01 m" to " 15' 0" "/"4.50 m" (1/2 / 0.01 m units).
• The unit of distance (feet / meters) shown is the
unit selected for use in "Distance".
You can enhance the reflection effect of Dolby
Enabled Speakers from the ceiling.
"Off": Do not use this function
"On": Use this function