Toothbrush Handle; Brush Head - Philips Sonicare HealthyWhite+ HX8962/05 Manual

14
English
-
To deactivate charger confirmation:
Press and hold the intensity level button up (+) for 2 seconds.
You hear 1 beep and the battery level indicator lights up yellow
once to indicate that the charger confirmation feature has been
deactivated.
Cleaning

Toothbrush handle

1 Remove the brush head and rinse the metal shaft area with warm
water. Make sure you remove any residual toothpaste (Fig. 12).
Caution: Do not push on the rubber seal on the metal shaft with
sharp objects, as this may cause damage.
2 Wipe the entire surface of the handle with a damp cloth.

Brush head

Rinse the brush head and bristles after each use (Fig. 13).
1
2 Remove the brush head from the handle and rinse the brush head
connection with warm water at least once a week.
Charger
1 Unplug the charger before you clean it.
2 Wipe the surface of the charger with a damp cloth. Make sure you
remove any toothpaste or other residue from the charger surfaces.
Storage
If you are not going to use the Sonicare for an extended period of
time, unplug the charger from the electrical outlet, clean it and store it
in a cool and dry place away from direct sunlight.
35_020_9633_2_DFU-Simple_A6_v1.indd 14 08/12/15 08:47