White Mode; Intensity Levels - Philips HealthyWhite+ Manual

Note: Ensure that braces or dental restorations are
properly adhered and not compromised. If not, braces
or dental restorations may be damaged when they
come into contact with the brush head.
Note: When the Philips Sonicare is used in clinical
studies, the default 2-minute Clean mode with high
intensity must be selected. The handle should be fully
charged and the Easy-start feature deactivated.
Brushing modes
Clean mode
The ultimate in plaque removal (default mode).

White mode

To brighten and polish your front teeth.
1 Press the power on/off and mode button to
turn on your Philips Sonicare.
2 Press the power on/off and mode button again
before 2.5 seconds to switch to White mode.
3 Press the power on/off and mode button after
2.5 seconds to pause your Philips Sonicare.

Intensity levels

- Low: 1 LED indicator light
- Medium: 2 LED indicator lights
- High: 3 LED indicator lights
Note: To adjust the intensity level to the next higher or
lower level, press the + intensity level button to increase
intensity or the - intensity level button to decrease
intensity at any time during the brushing cycle.
ENGLISH
9