Dear Customer - Jonsered GT 2228 Operator's Manual

Dear Customer,

Congratulations on your choice to buy a Jonsered
product!
We are convinced that you will appreciate with great
satisfaction the quality and performance of our product
for a very long time to come. The purchase of one of our
products gives you access to professional help with
repairs and service whenever this may be necessary. If
the retailer who sells your machine is not one of our
authorised dealers, ask for the address of your nearest
service workshop.
It is our wish that you will be satisfied with your product
and that it will be your companion for a long time. Think
of this operator's manual as a valuable document. By
following its content (usage, service, maintenance, etc),
the life span and the second-hand value of the machine
can be extended. If you sell this machine, make sure
that the operator¢s manual is passed on to the buyer.
Good luck on using your Jonsered machine!
Jonsered has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
#
INTRODUCTION
Note the f ollowing before
starting:
Please read the operator's manual carefully.
Maintenance, replacement, or repair of the emission
control devices and system may be performed by any
nonroad engine repair establishment or individual.
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown to
meet Federal and California emissions requirements.
3
the design of the machine be modified
modifications and/or accessories can
The machine can be dangerous
if it is used incorrectly or carelessly, and
can cause serious or fatal injury to the
operator or others. It is extremely impor-
tant that you read and understand the
contents of this operator's manual.