Table of Contents
Advertisement
3.
Load paper (letter headed paper face down and top edge towards the front of the
printer), as shown.
b
4.
Adjust the rear stopper (a) and paper guides (b) to the size of paper being used.
5.
Close the paper tray gently.
6.
Set the correct paper size. Refer to
"Registering custom sizes" on page
NOTE
After closing the tray, the media selection screen will be displayed on the
panel.
To prevent paper jams:
>
Do not leave space between the paper and the guides and rear stopper.
>
Do not overfill the paper tray. Capacity depends on the type of paper stock.
>
Do not load damaged paper.
>
Do not load paper of different sizes or types at the same time.
>
Close the paper tray gently.
a
"Configuring the tray settings" on page 36
37.
Loading paper > 34
and
Advertisement
Table of Contents
