Makita DSC251ZK Instruction Manual
Cordless steel rod cutter
Hide thumbs
Also See for DSC251ZK:
- Instruction manual (116 pages) ,
- Instruction manual (180 pages) ,
- Instruction manual (128 pages)
Table of Contents
Related Manuals for Makita DSC251ZK
Summary of Contents for Makita DSC251ZK
- Page 1 INSTRUCTION MANUAL Cordless Steel Rod Cutter DSC251 Read before use. Before installing and operating this machine, read, understand and follow all instructions and operating procedures. Keep this Instruction Manual with the machine.
-
Page 2: Specifications
*** Makita shall not be responsible for any inci- Moving blade. Keep hands clear while machine is operating. Turn power off before servicing. dental damages or personal injuries result-... -
Page 3: Important Safety Instructions
• This manual should be retained for future described in this Instruction Manual and the reference. Makita catalog. Use of any other accessories or WARNING attachments may result in an accident or injury. 12. Do not expose the battery to fire as it may Before use, read this Instruction Manual explode or generate poisonous substances. - Page 4 Instruction Manual and the and do not allow persons unfamiliar with the power Makita catalog. Use of any other accessories or tool or these instructions to operate the power attachments may result in an accident or injury.
- Page 5 Electrical Safety Power tool use and care Power tool plugs must match the outlet. Never Do not force the power tool. Use the correct modify the plug in any way. Do not use any power tool for your application. The correct adapter plugs with earthed (grounded) power power tool will do the job better and safer at the tools.
- Page 6 Cutting with Tipped Saw Blades is noisy. Consider Do not use water or cutting oil when cutting. the work area environment. 12. Use only Makita genuine tipped saw. Dress and protective equipment 13. Do not leave the tool on the floor with switch Wear protective equipment;...
-
Page 7: Part Names
It will WARNING: Always wear protective equip- also void the Makita warranty for the Makita tool and ment; safety glasses, safety shoes, dust mask charger. and helmet. -
Page 8: Installing Or Removing Battery Cartridge
Battery protection system (Lithium- Installing or removing battery ion battery with star marking) cartridge CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. CAUTION: Always switch off the tool before installing or removing of the battery cartridge. -
Page 9: Operation
Indicator lamps Remaining capacity Lighted Blinking 75% to 100% 50% to 75% 25% to 50% 0% to 25% Fig.5 Charge the ► Fig.5: 1. Handle Position (parallel / left side) 2. Lock battery. Button 3. Handle Position (parallel / right The battery side) 4. - Page 10 Screw the Handle into threaded hole at the vertical Caution when cutting or parallel position for easier operation. Ensure that the Switch is at “O” position. Ensure that the Tipped Saw blade is well away from the material to be cut before switching on. CAUTION: As a safety function of this tool, Slow down the forward (cutting) movement of the...
-
Page 11: Overload Protection
Battery Indicator function Table 2 Mode indicator status Operation mode High speed mode High torque mode Tool / battery protection function The tool will automatically stop during operation if the tool or battery is placed under one of the following conditions: The tool is overloaded The tool overheats... - Page 12 Remove the Tipped Saw Guide and the Tipped Saw. How to replace the Tipped Saw CAUTION: Use only Makita supplied Tipped Saw. If reusing a Tipped Saw, ensure it is not worn, chipped or damaged. CAUTION: Use only a Tipped Saw with three holes which fit the pins on the output shaft of the tool.
-
Page 13: Maintenance
MAINTENANCE CAUTION: Always ensure that the tool is switched off and the battery is removed before attempting to perform inspection or maintenance. NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. Fig.14 ► Fig.14: 1. Dust Cover Remove the Dust Cover from the air vent and clean it for proper air circulation. - Page 16 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan DSC251-ENEU-1806 www.makita.com 20161019...