Rowenta PRECISION VALET IS9070U1 Manual page 8

ccessories
Before using an accessory, check the manufactu-
rer recommendations.
It is also recommend that you carry out a test on
part of the fabric which cannot be seen.
Upholstery brush*
The upholstery brush is used to aid steam pene-
tration into difficult, heavy fabrics, for faster
results.
Be sure unit is unplugged and completely cool
before attaching accesories.
• ttach the upholstery brush to the steam head
by lining up the bottom of the brush with the
bottom of the steam head. Gently push the top
of the brush onto the steam head until it clicks .
• G ently brush the area to be steamed with the
grain or nap of the fabric.
• Remove the upholstery brush once the unit is
unplugged and completely cooled down.
Remove it by pressing on the tab on top of the
brush while pulling it forward.
Fabric brush*
The fabric brush opens the weave of the fabrics
for better steam penetration.
Be sure unit is unplugged and completely cool
before attaching accesories.
• ttach the fabric brush to the steam head by
lining up the bottom of the brush with the bot-
tom of the steam head. Gently push the top of
the brush onto the steam head until it clicks into
place.
• Gently brush the area to be steamed with the
grain or nap of the fabric.
• Remove the fabric brush once unit is unplugged
and completely cool. Remove it by pressing on
the release tab on top of brush while pulling it
forward.
* epending on the model: these accessories are specific to certain models or available as an option.
(depending on model)
8