❷ Connecting Your Computer/Connecting The Power Cord; Using The Power Cord Stopper - NEC PA723U User Manual

Hide thumbs Also See for PA723U:
Table of Contents

Advertisement

❷ Connecting Your Computer/Connecting the Power Cord
1. Connect your computer to the projector.
This section will show you a basic connection to a computer. For information about other connections, see "(2)
Making Connections" on page 143.
Connect the display output terminal (mini D-sub 15 pin) on the computer to the computer video input terminal
on the projector with a commercially-available computer cable (with ferrite core) and then turn the knobs of the
connectors to secure them.
2. Connect the supplied power cord to the projector.
First connect the supplied power cord's three-pin plug to the AC IN terminal of the projector, and then connect
another plug of the supplied power cord directly in the wall outlet. Do not use any plug converter.

Using the power cord stopper

To prevent the power cord from accidently removing from the AC IN of the projector, use the power cord stopper.
CAUTION
• To prevent the power cord from coming loose, make sure that all the prongs of the power cord plug are fully in-
serted into the AC IN terminal of the projector before using the power cord stopper. A loose contact of the power
cord may cause a fire or electric shock.
The power cord stopper is consisted from the part (A) that should be installed on the projector and the part (B) that
should be installed on the power cord.
1. Fix the part (A) to the AC IN terminal on the projector
cabinet.
2. Fix the part (B) to the power cord.
3. Insert the power cord plug to the AC IN terminal until
the power cord stopper is fastened completely and
click sound is heard.
2. Projecting an Image (Basic Operation)
15
Part (A)
Part (B)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents