Braun 7760cc Manual page 15

Charging and cleaning the shaver
Insert the shaver head with the front showing
and released head lock
The contacts
u
align with the contacts
Important: The shaver needs to be dry and
free from any foam or soap residue!
If required, the Clean&Renew station will auto-
matically charge the shaver. The hygiene status
of the shaver will also be analyzed and one of
the following cleaning program indicators
light up:
shaver is clean
short economical cleaning required
normal level of cleaning required
high intensive cleaning required
If the station selects one of the required cleaning
programs, it will not start unless you press the
. For best shaving results, we
start button
4
recommend cleaning after each shave.
Each cleaning program consists of several
cycles, where cleaning fl uid is fl ushed through the
shaver head. Depending on your Clean&Renew
station model and/or program selected, the
cleaning time takes up to 16 minutes. Leave the
shaver in the station for drying. It takes several
hours until remaining moisture evaporates
depending on the climatic conditions.
When the program is fi nished, the blue
indicator will light up.
Stand-by mode
10 minutes after completing the charging or
cleaning session, the Clean&Renew station
switches to the stand-by mode: The indicators
of the Clean&Renew station turn off.
Shaver display
The shaver display
of the battery. During charging or when using the
shaver, the respective green charge status will
blink. When the battery is fully charged the green
charge status will light up continously, provided
the shaver is switched on or connected to an
electrical outlet.
Some minutes after completing the charging, the
shaver switches to the stand-by-mode:
The display turns off.
into the Clean&Renew.
0
on the back of the shaver will
in the cleaning station.
3
shows the charge status
z
will
5
15