Char-Broil CB600X 10201597-50 Product Manual page 15

• Install legs by placing 2 - 1/4-20x1/2" Hex Head Bolt through the smoker body and through each leg as shown. Thread the • Install legs by placing 2 - 1/4-20x1/2" Hex Head Bolt through the smoker body and through each leg as shown. Thread the
5
bolts into the 1/4-20 nut welded to the underside of each leg. Tighten bolts by hand. Using an adjustable wrench (not bolts into the 1/4-20 nut welded to the underside of each leg. Tighten bolts by hand. Using an adjustable wrench (not
provided), tighten each bolt securely. provided), tighten each bolt securely.
• Install the leg with the rating label on the back side of the smoker body, as shown. • Install the leg with the rating label on the back side of the smoker body, as shown.
6
• With the assistance of a helper - stand the unit upright on its legs. • With the assistance of a helper - stand the unit upright on its legs.
CAUTION: THIS UNIT IS HEAVY! CAUTION: THIS UNIT IS HEAVY!
Install bolts from inside Install bolts from inside
the smoker body the smoker body
Leg with Rating Label Leg with Rating Label
Stand the unit upright on its legs Stand the unit upright on its legs
CAUTION: This unit is HEAVY! CAUTION: This unit is HEAVY!
Do not attempt this step Do not attempt this step
without assistance! without assistance!
Qty: 8 Qty: 8
#1/4-20x1/2" #1/4-20x1/2"
Hex Head Bolt Hex Head Bolt
10201597-50 • 15