Table of Contents
Advertisement
Machine actions
The machine grinds the
coff ee beans but no coff ee
comes out.
(See note)
Coff ee is too weak.
(See note)
Coff ee is brewed slowly.
(See note)
Coff ee leaks out of the
dispensing spout.
Causes
There is no water.
The brew group is dirty.
This might occur when the machi-
ne is automatically adjusting the
dose.
The dispensing spout is dirty.
This might occur when the machi-
ne is automatically adjusting the
dose.
The coff ee is too coarse.
The coff ee grind is too fi ne.
Circuits are clogged.
The brew group is dirty.
The dispensing spout is clogged.
Note:
These problems can be considered normal if the coff ee blend has been
changed or if the machine has just been installed. In this case wait until
the machine performs a self-adjusting operation as described in chapter
"Saeco Adapting System".
ENGLISH
Solutions
Fill the water tank and prime the circuit
(please refer to chapter "Manual rinse
cycle").
Clean the brew group ("Weekly clea-
ning of brew group" chapter).
Brew a few coff ees as described in
chapter "Saeco Adapting System".
Clean the dispensing spout.
Brew a few coff ees as described in
chapter "Saeco Adapting System".
Change coff ee blend or adjust the
grind as explained in chapter "Adju-
sting the ceramic coff ee grinder".
Change coff ee blend or adjust the
grind as explained in chapter "Adju-
sting the ceraminc coff ee grinder".
Perform a descaling cycle.
Clean the brew group (please refer to
chapter "Weekly cleaning of the brew
group").
Clean the dispensing spout and its
holes.
69
69
Advertisement
Table of Contents
