Sony Cyber-shot DSC-RX10M3 Instruction Manual page 46

Using a smartphone/tablet computer as a remote controller (One-touch remote (NFC))
Detailed operations are described in the "Help
Guide" (on-line manual).
Required equipment/environment: A smartphone or a tablet computer (a wireless access point
is not necessary).
Refer to the supplied Instruction Manual for more
information about the "Help Guide:'
You can monitor the image to be captured and shoot with your smartphone. After step 1 on the reverse side, set the camera to shooting mode and connect following the steps below.
Touch
(9
mark on the camera to
(9
mark on the Smartphone.
For notes on connection, see
E)
under step 2 "Android supporting NFC (One-touch
sharing)" on the reverse side.
MENU--+ li~ (Application)--+ [Application List]-+ [Smart Remote Embedded]-+
Proceed to step 2 "Connecting using a QR Code"-8 on the reverse side.
If you cannot connect your Smartphone to the camera, connect them using the SSID
and the password. For details, refer to the Help Guide.
Communication distance may vary, depending on your surroundings/ smartphone. The Live View image may not be displayed smoothly, depending on the radio wave environment
and the capability of your smartphone.
Sending images to the computer
Steps 1 and 2 are required the first time only.
Required equipment/environment: The computer must be connected to a wireless access point.
1 Install the latest software on your computer.
After the software is installed on your computer, connect the camera and your computer through USB and set the Wi-Fi import settings.
www.sony.net/pm/
2 Connect the camera to an access point.
http://www.sony.eo.jp/imsoft/Mac/
Select [Wireless Auto Import].
~mmmtl~~
Note: For more information, refer to the instruction of the access point, or contact the person who set up the access point.
8
Select MENU--+ ,'lt. (Wireless)--+ [WPS Push) on the camera.
f)
Push the WPS button on the wireless access point
)IOU
want to
register.
8
Select MENU--+ ,'lt. (Wireless)--+ [Access Point Set.) on the camera.
f)
Select the access point you want to register, enter the password, then select [OK).
3 When your computer is not started, turn on the computer.
4 Start sending images to the computer.
8
Confirm that a memory card icon is displayed on the
screen.
f)
Select MENU--+ ,'lt. (Wireless)--+ [Send to Computer).
• Image saving automatically starts.
Access Point Settings
le Jr.E.o.GLE
• Previously sent images are not duplicated.
• Sending a movie or multiple still images takes time.
Using other Wi-Fi functions
Other Wi-Fi functions are available, such as
transferring images to a
TV
and playing them
back.
For further details, refer to the Help Guide.
0 0
II
0 1G:!l
0
I